The use of a tool to carry out diagnostics on a vehicle has become normal practice to quickly isolate any faults and consequently carry out their repair. The fact that electronic components have become an integral part of any vehicle the use of a diagnostic tool has become indispensable.

The official dealer network have at their disposal equipment directly supplied by the vehicle manufacturer, but the all makes workshop requires a tool that is able to carry out diagnostics on a large number of vehicle makes.

Our tool addresses those needs for all the workshops who want to carry out checks and diagnostics on a vast range of cars, using an advanced tool with characteriscs and functionality superior to the official tools, at the same time easy to use with a simple user interface and intuitive visual displays on a 15 inch LCD touch screen. But Leonardo offers much more, in addition to the advanced diagnostic functions (reading and erasing errors, reading data in real time, diagnostics on every electronic component–just to mention a few), it is possible in future to make use of a multimeter, a twin channel oscilloscope and of MILLENIUM OBD-II pro, powered by software from our notable OBD serial tuning tool for ECUs.

GENERAL SPECIFICATIONS

- Simple to use user interface, intuitive, complete with descriptive keys.

- Separate unit with high speed connections, Bluetooth (class 1 with 100m range) or cable.

- Human interface with 15 inch TFT LCD touch screen display, innovative compact design

- Diagnostic interface with OBD vehicle plug and propreatary connectors (e.g. BMW, Mercedes, Fiat etc) with 5 inch TFT LCD touch screen with independent functions ( i.e. scan tool).

- Diagnostics for all on board systems present on a vehicle and covering all the major car makes (Diagnostics through K-L line, J1850 and Can bus).

DIAGNOSTICS

Automatic search and diagnostics of all on board ECUs (i.e. Mercedes E Class W211 up to 65 settings) by pressing a single key (Fast Test Function).

On every electronic component the following can be carried out:

1. Reading and erasing errors.
2. Automatic display of  Idendification, Hardware number, Software number and ECU manufacturer.
3. Reading of data in real time and displayed in numeric or graphic mode (up to 8 channels at the same time)
4. Check operation of components (i.e. electric windows, lighting, engine solenoid activation, etc.)
5. Adaptation and coding (reinitialize keys, ECU configuration, coding, recoding, programming ect.).

PROGRAMMING (on request)

Programming/Tuning ECUs using Millenium OBD II – Pro software, evolved from our Millenium Obd Tuning tool.

MEASUREMENTS

 
MULTIMETER:
(future implementation) 

Reading of dc or ac voltage (voltmeter); Reading of resistive values (ohmmeter); Reading of dc or ac amperage (ampmeter); Continuity tester (components and cables).

DUAL CHANNEL OSCILLOSCOPE:
(future implementation)

AUTOSET Function on signals being measured; HOLD/RUN Function on displayed signals; 40KHz Analog band; Samples per second : 100.000; Print the on screen data.

TECHNICAL INFORMATION SYSTEM (SIT)

Simple to use database containing technical vehicle information.

ACCESSORIES SUPPLIED

1. Impact resistant case with accessory housings.

2. Diagnostic cables kit.

3. Multimeter/oscilloscope cables kit.

4. In car power cable (cigarette ligher-12v)

5. Mains switching power supply/battery charger 100÷240Vac 50÷60Hz

SPECIFICHE TECNICHE

POWER SUPPLY

- Mains using switching power supply/battery charger 100÷240Vac 50÷60Hz

- In car 12÷24 V;

- Battery - over 2 hours.

DISPLAY

- LCD TFT 15” Touch screen – Resolution 1024-768 (Human interface)

- LCD TFT 5” Touch screen – Resolution 320x234 (Diagnostic interface)

DIMENSIONS

300x370x70